FuturesAI Payback: What Fees Take From Margin at 10x
Short answer. As of November 18, 2026, FuturesAI’s payback page lists an effective taker fee of 0.045% per side on Binance and 0.015% on Bitget. At 10x leverage, a Binance round trip costs 0.90% of your margin. Bitget costs 0.30%.
The rate never changes with leverage. Your deposit does. This post runs the numbers.
Educational arithmetic only. Not investment advice. Leveraged futures can lose the entire margin.
Open a $5,000 position on $500 of margin and the fee is billed on all $5,000. That is the detail most people miss. A rate that looks like rounding error on the position turns into a real bite out of the deposit.
Check the payback table on FuturesAI
Jump to a Section
- How does leverage turn a tiny fee into a big one?
- What does each exchange cost per round trip?
- What does a $500 account pay over a month?
- Where does the fee line sit next to a price move?
- Which costs does this table leave out?
How does leverage turn a tiny fee into a big one?
A futures fee is charged on position size, so the fee as a share of your margin equals the round-trip rate multiplied by the leverage. Take Binance at an effective 0.045% per side, which makes 0.090% round trip. At 10x that is 0.090% x 10, or 0.90% of the margin, gone before the price has moved an inch.
That is the whole formula. Nothing else.
When I checked the payback table, I found that each effective rate is the exchange’s listed taker fee after the payback share is taken off. Bybit lists 0.055% and a 20% payback, which lands on 0.044%. Gate lists 0.050% and a 70% payback, which lands on 0.015%. Bitget adds a 50% fee discount on top of its 50% payback, so its 0.060% listed rate ends at 0.015%.
| Exchange | Effective taker (per side) | Round trip, % of position | 5x | 10x | 20x | 50x |
|---|---|---|---|---|---|---|
| Bitget | 0.015% | 0.030% | 0.15% | 0.30% | 0.60% | 1.50% |
| Gate | 0.015% | 0.030% | 0.15% | 0.30% | 0.60% | 1.50% |
| OKX | 0.040% | 0.080% | 0.40% | 0.80% | 1.60% | 4.00% |
| Bybit | 0.044% | 0.088% | 0.44% | 0.88% | 1.76% | 4.40% |
| Binance | 0.045% | 0.090% | 0.45% | 0.90% | 1.80% | 4.50% |
Read across a row. Gate and Bitget stay under 1% of margin until about 33x. Binance crosses 1% at about 11x.
What does each exchange cost per round trip?
On FuturesAI’s payback page, read on November 18, 2026, the five main centralized exchanges list effective taker fees from 0.015% (Bitget and Gate) to 0.045% (Binance), which is a round-trip cost of 0.030% to 0.090% of the position. The spread between them is a factor of three.
The page defines the bracketed figure as the fee actually paid after both the discount and the payback. I used the market-order column, since a stop-loss or a fast exit is usually a market order.
Here’s where people get tripped up: the headline payback percentage alone says little. Gate shows 70% and Bitget shows 50%, yet both end at the same 0.015% because Bitget starts from a lower rate after its discount. Compare the bracketed figure, not the percentage.
For the full method of rebuilding each number yourself, see FuturesAI Payback: How to Check Each Effective Fee Rate.

What does a $500 account pay over a month?
A trader who opens a $5,000 position on $500 of margin 20 times a month pays $30 in taker fees on Bitget and $90 on Binance, which is 6% and 18% of the $500 deposit. Both use the effective rates above and ignore funding.
| Exchange | Round-trip fee on $5,000 | Per trade, % of $500 margin | 20 trades a month | 20 trades, % of margin |
|---|---|---|---|---|
| Bitget | $1.50 | 0.30% | $30.00 | 6% |
| Gate | $1.50 | 0.30% | $30.00 | 6% |
| OKX | $4.00 | 0.80% | $80.00 | 16% |
| Bybit | $4.40 | 0.88% | $88.00 | 18% |
| Binance | $4.50 | 0.90% | $90.00 | 18% |
Check one cell by hand. $5,000 x 0.030% = $1.50 for Bitget, and $1.50 / $500 = 0.30% of margin. Multiply by 20 and you get $30.
Honestly, that last column surprised me. When I compared the monthly totals, I noticed that the gap between the cheapest and the dearest row is $60 a month on this one small account, and no price prediction is involved at all. The cost is certain. The trades are not.
Where does the fee line sit next to a price move?
At 10x leverage, a price move of 0.1% changes your margin by 1%, so a Binance round trip of 0.090% uses up 90% of that move and a Bitget round trip of 0.030% uses up 30% of it. A trade must move further than the round-trip rate before it earns a cent.
The break-even move is the round-trip rate itself: 0.030% on Bitget and Gate, 0.080% on OKX, 0.088% on Bybit and 0.090% on Binance. Leverage does not change that line. It changes how big the line looks relative to your deposit.
So a scalper aiming for 0.15% moves is working against a cost that is 60% of the target on Binance and 20% on Bitget. A swing trader aiming for 3% moves barely notices either. That’s the real reason fee level matters most for short holding periods.
Which costs does this table leave out?
The table covers the taker fee only. Funding payments, the bid-ask spread, slippage on thin pairs and any maintenance-margin rule that sets your liquidation price are all absent. The payback page does not publish them, so I have not made them up.
If you plan to size positions off this arithmetic, keep a margin buffer. At 50x, a price move of about 2% against you can wipe out a position’s margin before maintenance requirements are even counted, and the fee already took 1.5% to 4.5% of it at the open and close.
Before you trade, do three things:
- Write down the effective taker rate from the table, not the headline payback percentage.
- Multiply it by two, then by your leverage. That is your fee as a share of margin.
- If the result is above 1%, shorten the leverage or widen the target before you click.
FAQ
Does a higher leverage setting change the fee rate?
No. The exchange charges its rate on the position size, so the percentage of notional stays the same. What changes is the share of your own margin that the fee represents, because the same dollars sit on a smaller deposit.
Do these figures include funding and spread?
No. They cover the taker fee only, after discount and payback. Funding payments, the bid-ask spread and slippage are separate costs that come on top, and they vary by pair and hour.
What if I use limit orders instead of market orders?
The same table has lower rates for limit orders, so the margin share shrinks. Orders that fill as maker also depend on the market coming to your price, so a fill is not guaranteed.
Sources
- FuturesAI payback page: partner exchange fees and payback, read November 18, 2026
- FuturesAI scoreboard: disclosure that its figures exclude fees, read November 18, 2026
Check the payback table on FuturesAI
Fact-checked based on public sources as of November 18, 2026. Fee rates change; confirm on the exchange before trading. This is not investment advice, and leveraged futures can lose the full principal.
