FuturesAI Payback: How to Check Each Effective Fee Rate
Short answer: You can verify every effective fee on FuturesAIโs partner exchange table with one multiplication: the listed fee times (1 minus the payback rate). Gate, OKX, Bybit, Binance and the 55% exchanges all match. Bitget needs one extra step, a 50% fee discount applied first. This is arithmetic on printed numbers, not investment advice.
A table that prints two fees side by side invites a fair question: how did it get from one to the other?
I rebuilt the effective-fee column on November 10, 2026 from the headline rates and payback percentages shown on the page. Below is the formula, the check for every exchange, and the one row where the order of operations changes the answer by $15 per $100,000.
What This Checks
- What is the formula behind the effective fee?
- Do the market-order rates reproduce?
- Do the limit-order rates reproduce?
- Why does Bitgetโs order of operations matter?
- What does the check mean in dollars?
- How do you run this check yourself?
What is the formula behind the effective fee?
On the FuturesAI partner exchange table read on November 10, 2026, each effective fee equals the headline fee multiplied by (1 minus the payback percentage), with Bitgetโs 50% fee discount applied before its payback (futuresai.io/en/payback).
The page says it directly: figures in brackets are what you actually pay once the fee discount and payback are applied. So the bracket number is the one to test.
The formula in one line: effective fee = headline fee ร (1 โ payback). For Bitget: headline ร (1 โ discount) ร (1 โ payback).
Do the market-order rates reproduce?
The market (taker) effective fee printed for Gate, Toobit, Echobit, OrangeX, OKX, Bybit and Binance matches headline ร (1 โ payback) in all seven cases, based on the November 10, 2026 reading of FuturesAIโs table.
| Exchange | Headline market fee | Payback | Headline ร (1 โ payback) | Printed effective | Match? |
|---|---|---|---|---|---|
| Gate | 0.05% | 70% | 0.015% | 0.015% | Yes |
| Toobit / Echobit / OrangeX | 0.06% | 55% | 0.027% | 0.027% | Yes |
| OKX | 0.05% | 20% | 0.040% | 0.040% | Yes |
| Bybit | 0.055% | 20% | 0.044% | 0.044% | Yes |
| Binance | 0.05% | 10% | 0.045% | 0.045% | Yes |
When I checked each row against the printed bracket, I found that none needed rounding. Gateโs 0.05% ร 0.30 is exactly 0.015%. Toobitโs 0.06% ร 0.45 is exactly 0.027%.
Do the limit-order rates reproduce?
The limit (maker) effective fee on the same table also matches headline ร (1 โ payback) for every exchange except Bitget, which again needs its discount first.
| Exchange | Headline limit fee | Payback | Headline ร (1 โ payback) | Printed effective | Match? |
|---|---|---|---|---|---|
| Gate | 0.02% | 70% | 0.006% | 0.006% | Yes |
| Toobit / Echobit / OrangeX | 0.02% | 55% | 0.009% | 0.009% | Yes |
| OKX | 0.02% | 20% | 0.016% | 0.016% | Yes |
| Bybit | 0.02% | 20% | 0.016% | 0.016% | Yes |
| Binance | 0.02% | 10% | 0.018% | 0.018% | Yes |
Honestly, it is a satisfying check. The table is internally consistent. That does not make the headline fees right, only that the bracket column follows from them.

Why does Bitgetโs order of operations matter?
Bitgetโs printed effective market fee of 0.015% on FuturesAIโs table comes from a 0.06% headline fee cut 50% by a fee discount, then cut 50% again by payback, not from a combined 100% reduction.
| Step | Calculation | Market fee |
|---|---|---|
| Headline | โ | 0.060% |
| After 50% fee discount | 0.060% ร 0.50 | 0.030% |
| After 50% payback on the discounted fee | 0.030% ร 0.50 | 0.015% (matches the page) |
| If payback applied to the headline instead | 0.060% โ 0.030% โ 0.030% | 0.000% (not what the page shows) |
The difference is the most likely misread of the page. A reader who adds 50% and 50% expects a free trade. The page itself prints 0.015%, which means payback is a share of the fee you actually owe after the discount.
The limit side behaves the same way: 0.02% ร 0.50 ร 0.50 = 0.005%, exactly as printed.
What does the check mean in dollars?
At $100,000 of market-order volume, the effective fees on FuturesAIโs November 10, 2026 table work out to $15 on Gate and Bitget, $27 on the 55% exchanges, $40 on OKX, $44 on Bybit and $45 on Binance.
| Exchange | Fee on $100,000 before payback | Payback returned | You pay |
|---|---|---|---|
| Gate | $50 | $35 | $15 |
| Bitget (after discount) | $30 | $15 | $15 |
| Toobit / Echobit / OrangeX | $60 | $33 | $27 |
| OKX | $50 | $10 | $40 |
| Bybit | $55 | $11 | $44 |
| Binance | $50 | $5 | $45 |
Gate and Bitget tie at $15, one by a 70% payback on a $50 fee and the other by a discount plus payback on a $60 fee. Same bill, different route. The page lists transfer availability and payback timing separately, so cost is not the only filter.
These are fee figures only. A $15 fee on $100,000 does not say anything about whether the trades make money, and leveraged futures can lose your full principal.
How do you run this check yourself?
You can audit any fee-payback table in four steps: copy the headline rate, copy the payback percent, multiply, and compare with the printed effective rate.
- Open the exchangeโs own fee page and confirm the headline rate for your tier.
- Multiply by (1 โ payback). Add the discount step first if the exchange applies one.
- Compare with the table. A mismatch means a hidden condition, so ask what it is.
- Multiply by your monthly volume to get dollars.
Do it before you move volume, not after the first statement.

Tips
- Screenshot the table with the date. Rates change.
- Use your own tierโs headline rate if it differs from the public one.
- Check which orders you place most. The maker rate only applies to resting limit orders.
Warnings
- This is arithmetic, not investment advice. Leverage can lose the full principal.
- Payback requires a verified, referral-linked account, according to the page.
- Effective fees are before funding rates, spreads and slippage.
FAQ
What is the payback percentage applied to on FuturesAI’s partner exchange table?
On FuturesAI’s partner exchange table read on November 10, 2026, the payback percentage reproduces the printed effective fee when it is applied to the fee left after any discount. Gate’s 70% on a 0.05% market fee gives 0.015%, and Bitget’s 50% applied after its 50% discount on a 0.06% fee also gives 0.015%.
Does Bitget’s 50% discount plus 50% payback mean a zero fee?
No. FuturesAI’s table prints Bitget’s effective market fee as 0.015%, not zero. The payback applies to the discounted fee, so 0.06% becomes 0.03% after the discount and 0.015% after payback, which is $15 per $100,000 traded.
Why do some exchanges show a lower effective maker fee than taker fee?
Every exchange in the table lists a 0.02% maker (limit) fee against a taker (market) fee of 0.05% to 0.06%. After payback, the maker figure falls to between 0.005% and 0.018%, but a trader pays the maker rate only when an order rests on the book and is filled by someone else.
Sources
Figures recalculated from the public FuturesAI payback table as of November 10, 2026. Not investment advice.
For the same table priced per million dollars, see Rank 8 Exchanges by Cost per $1M, and for the order-type split see How to Price Limit vs Market Orders.
๐ Related guides
