FuturesAI Payback: Does a 70% Rate Beat a 50% Rate?
Short answer: Not by itself. On FuturesAI’s payback page (read November 15, 2026), Gate lists a 70% payback and Bitget lists 50%. Their effective market-order fee is the same, 0.015%. On limit orders Bitget is lower, 0.005% against 0.006%. On $100,000 of volume, that gap is $1.00. This is arithmetic on listed rates, not investment advice.
Not investment advice. Leverage can lose the full principal. No profit is promised; this post only compares listed fee rates.
A bigger payback number looks like a better deal. The effective fee column on the same page says otherwise, and the difference is worth ten minutes.
What This Compares
- What does the payback page actually list?
- What does $100,000 of volume cost at each exchange?
- Why does a 50% payback match a 70% one on market orders?
- How much do the differences matter?
- Check it yourself in four steps
What does the payback page actually list?
FuturesAI’s payback page lists a payback percentage and two effective fee rates, limit and market, for each centralized exchange, as read on November 15, 2026. It says the bracketed effective figures apply both fee discounts and payback, and that rates match each exchange’s detail page.
When I checked the table, I noticed that the payback percent and the effective fee do not line up in a straight line. The standard limit fee shown is 0.02% everywhere in my sample, so a 70% payback leaves 0.006% and a 50% payback should leave 0.010%. Bitget’s listed 0.005% is lower than that, which means it also has some other discount built in.

What does $100,000 of volume cost at each exchange?
At listed effective rates, $100,000 of market-order volume costs between $15.00 and $45.00 across six exchanges, and $100,000 of limit-order volume costs between $5.00 and $18.00. The blended column assumes half the volume is limit and half is market.
| Exchange | Payback | Effective limit | Effective market | Limit cost per $100K | Market cost per $100K | 50/50 blend |
|---|---|---|---|---|---|---|
| Bybit | 20% | 0.016% | 0.044% | $16.00 | $44.00 | $30.00 |
| Bitget | 50% | 0.005% | 0.015% | $5.00 | $15.00 | $10.00 |
| OKX | 20% | 0.016% | 0.040% | $16.00 | $40.00 | $28.00 |
| Gate | 70% | 0.006% | 0.015% | $6.00 | $15.00 | $10.50 |
| Binance | 10% | 0.018% | 0.045% | $18.00 | $45.00 | $31.50 |
| Toobit | 55% | 0.009% | 0.027% | $9.00 | $27.00 | $18.00 |
Rates read from futuresai.io/payback on November 15, 2026. Costs calculated by this site: volume x effective rate. Fees only; excludes funding and slippage.
Gate and Bitget sit together at the bottom of the cost column. Binance, with the smallest payback, is the most expensive.
Why does a 50% payback match a 70% one on market orders?
A 50% payback can match a 70% payback on market orders because the effective rate depends on the exchange’s own fee after discounts, not just the payback share. Bitget’s market rate drops from a listed 0.06% to 0.015%, which is a 75% total reduction, while Gate’s drops from 0.05% to 0.015%, a 70% reduction.
Both end at 0.015%. The payback percent alone would have ranked them wrong.
Same story with Bybit and OKX: both list 20% payback, yet OKX’s effective market fee is 0.04% against Bybit’s 0.044%. On $100,000 that is $4.00 apart, with identical payback percentages.
How much do the differences matter?
The Gate versus Bitget gap is $1.00 per $100,000 of limit volume and $0.00 on market volume, so for most traders it does not decide anything. The gap that matters is between that pair and Binance: $30.00 per $100,000 on market orders ($45.00 against $15.00).
A trader doing $1,000,000 a month in market orders would see about $300 a month between Gate or Bitget and Binance on fees alone. Run it for your own volume; the answer scales linearly. For the full eight-exchange ranking see FuturesAI Payback: Rank 8 Exchanges by Cost per $1M, and for how your limit-to-market mix shifts it see FuturesAI Payback: How to Price Limit vs Market Orders.
Fees are one line of the bill. Whether a strategy earns more than its fees is a separate question, and no listed rate answers it.
Check it yourself in four steps
- Open the payback page: note the bracketed effective rates, not the payback percent.
- Write down your monthly volume: split it into limit and market from your trade history.
- Multiply: volume x effective rate for each exchange you can actually use.
- Check the rate on the exchange itself: the page says it matches each exchange’s detail page, so confirm before you move funds.
Method details are in FuturesAI Payback: How to Check Each Effective Fee Rate.
Tips
- Compare effective fee, not the payback percent.
- Use your own limit-versus-market mix.
- Recheck rates on the exchange page before funding an account.
Warnings
- Leverage can lose the full principal; a low fee does not make a trade safe.
- Rates and promotions can change without notice.
- Payback availability depends on how you signed up and on each exchange’s conditions.
FAQ
Why is Gate’s effective maker fee not 30% of the standard rate by the same rule as Bitget?
FuturesAI’s payback page shows effective fees after both exchange fee discounts and payback. Gate’s 0.006% equals 30% of 0.02%, which matches a 70% payback. Bitget’s 0.005% is lower than 50% of 0.02%, so something besides the payback percent is at work.
Which number should I compare, the payback percent or the effective fee?
Compare the effective fee, since it is what each trade actually costs once discounts and payback are applied. The page says its bracketed figures include both. The payback percent alone can point the wrong way.
How often do these rates change?
Exchanges can change fee schedules and promotions at any time. FuturesAI’s page says fee rates match each exchange’s detail page, so recheck before you commit volume.
Sources
Next step: pull your last month of trades, split them by limit and market, and run the table above with your own volume before choosing where to trade.
Fact-checked against futuresai.io/payback as of November 15, 2026. Cost tables are our arithmetic. Not investment advice.
๐ Related guides
