Calculator and paperwork used to compare monthly AI API costs

GPT-5.6 Sol vs Gemini 4 Argon API Cost Before Promos End

Short answer: Both promo prices end on the same month-end. GPT-5.6 Sol’s promo runs through November 30, 2026, and Gemini 4 Argon’s intro rate does too. After that, Sol goes up about 37% on a mixed workload. Argon doubles. Argon’s new list price still lands exactly on Sol’s promo price.

Two of the biggest API price cuts of the fall expire within the same 24 hours. If you pay for either model by the token, your December invoice depends on a decision you can make this week.

Below is the arithmetic for two sample workloads, using the rates on OpenAI’s and Google’s own pricing pages as I read them on November 7, 2026.

Contents

When exactly do the two promo prices end?

GPT-5.6 Sol’s promotional API pricing of $4 per million input tokens and $20 per million output tokens is available until November 30, 2026, according to OpenAI’s GPT-5.6 model page (developers.openai.com).

Gemini 4 Argon costs $2.00 per million input tokens and $10.00 per million output tokens on the Standard tier through November 30, 2026. Google’s pricing page lists $4.00 and $20.00 starting December 1, 2026 (aistudio.google.com).

When I checked the trackers, I found that one of them still says Sol’s promo ends “at least” November 21. That wording is older. OpenAI’s own page now says November 30, so trust the vendor page over the aggregator.

Model (Standard tier, USD per 1M tokens) Input now Output now Input from Dec 1 Output from Dec 1
GPT-5.6 Sol $4.00 (promo) $20.00 (promo) $5.00 $30.00
Gemini 4 Argon $2.00 (intro) $10.00 (intro) $4.00 $20.00

Sources: OpenAI GPT-5.6 model page and Google AI Studio pricing page, checked November 7, 2026. Sol’s post-promo $5/$30 is the pre-cut rate; OpenAI describes the promo as 20% off input and 33% off output, which matches those figures.

What does a 50M-input, 10M-output month cost on each?

A team sending 50 million input tokens and 10 million output tokens a month pays $400 on GPT-5.6 Sol at promo rates and $200 on Gemini 4 Argon at intro rates, using the per-million prices in the table above.

Here is the same workload across the price change. Each cell is tokens in millions times the rate.

Scenario (50M in + 10M out) Input cost Output cost Monthly total
Sol, promo (to Nov 30) 50 × $4 = $200 10 × $20 = $200 $400
Sol, from Dec 1 50 × $5 = $250 10 × $30 = $300 $550
Argon, intro (to Nov 30) 50 × $2 = $100 10 × $10 = $100 $200
Argon, from Dec 1 50 × $4 = $200 10 × $20 = $200 $400

Sol rises $150, which is 37.5%. Argon rises $200, which is 100%. Even so, Argon in December ($400) is $150 cheaper than Sol in December ($550).

The detail that surprised me: Argon’s December list price is identical to Sol’s current promo price, line for line.

Laptop screen with data used to estimate monthly API token usage
For a 50M-input, 10M-output month, Sol costs $400 now and $550 from December 1, while Argon costs $200 now and $400 (OpenAI and Google pricing pages, November 2026).

What changes if your workload is mostly input?

A retrieval or document-summary workload with 200 million input tokens and only 5 million output tokens a month costs $900 on Sol’s promo and $450 on Argon’s intro, because input tokens dominate the bill.

Scenario (200M in + 5M out) Math Monthly total
Sol, promo 200 × $4 + 5 × $20 $900
Sol, from Dec 1 200 × $5 + 5 × $30 $1,150
Argon, intro 200 × $2 + 5 × $10 $450
Argon, from Dec 1 200 × $4 + 5 × $20 $900

Sol climbs 27.8% here and Argon climbs 100%. Same pattern, smaller Sol jump.

Honestly, the gap between the models shrinks only because Argon’s promo was so deep. On list price, Argon is 20% cheaper on input and 33% cheaper on output.

Where do cached tokens and batch change the math?

Cached input costs $0.40 per million tokens on GPT-5.6 Sol’s promo page and $0.10 per million on Gemini 4 Argon through November 30, 2026, rising to $0.20 for Argon on December 1.

Google also lists a Batch tier at half the Standard rates through November 30: $1.00 input and $5.00 output per million tokens. If your jobs can wait, that is the cheapest line on either page. Argon’s pricing page says only implicit caching is supported, so you cannot reserve a cache explicitly.

Prompts that repeat a long system message are the ones that benefit. If your app resends the same 20,000-token instructions on every call, that block is billed at the cached rate only when the cache actually hits.

Should you switch before November 30?

Switching models only because of a promo is a bad trade unless the cheaper model passes your own tests, since output quality and token usage per task differ and neither pricing page measures that.

  1. Pull last month’s token counts from each provider dashboard. Split input and output.
  2. Plug them into the tables above. Use December rates, not promo rates.
  3. Run 20 to 30 real prompts through both models and compare answers yourself.
  4. Count output tokens per answer. A model that thinks longer bills more output.
  5. Decide before November 30 and set a budget alert for December 1.

Most people skip step 4 and regret it.

Which cost traps does a per-token table hide?

A per-token price table hides reasoning tokens, because Google’s page says Argon output pricing includes thinking tokens, so a short visible answer can still bill a long output.

  • Pricing is per million tokens. A “cheap” rate times a long conversation history adds up fast.
  • Third-party gateways and cloud marketplaces set their own prices and dates. Amazon Bedrock and others announced Sol discounts on different days.
  • Consumer plans are separate from API billing. If you only use the chat apps, see Google AI Plus Loses Gemini Pro: What to Do Before Nov 13.
  • Argon is not new to this site. Our earlier note on who can access it is Gemini 4 Argon Is Now in Google AI Pro.

Before November 30, open both pricing pages once more and copy the current numbers into your own sheet. Vendors change these pages without notice.

Tips

  • Set a spend cap with each provider before December 1.
  • Log tokens per request for one week so your estimate uses real data.
  • Re-run the tables with your own volumes; the percentages above shift with your input-to-output ratio.

Warnings

  • Prices here are USD list prices for the Standard tier as of November 7, 2026, and can change.
  • This is cost arithmetic, not a quality ranking of either model.

FAQ

Does Gemini 4 Argon’s price really double on December 1?

Yes. Google’s pricing page lists Argon at $2.00 input and $10.00 output per million tokens through November 30, 2026, then $4.00 and $20.00 starting December 1, 2026.

Will GPT-5.6 Sol’s price go back to $5 and $30?

OpenAI’s model page says the promotional pricing is available until November 30, 2026, and describes it as 20% off input and 33% off output. Those percentages put the earlier rates at $5 input and $30 output per million tokens.

Is the cheaper model always the better buy?

No. A per-token price ignores how many tokens each model uses per answer and how good the answers are for your task. Test both on your own prompts and compare cost per finished task, not cost per token.

Sources

📌 Hub guide: For every fix, buying decision, and work-from-anywhere setup in one place — see the Tech & Digital Hub.

Written by the BlueMediaWorld AI Hub desk. Fact-checked against OpenAI and Google pricing pages on November 7, 2026.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *